GoPower LOAD BANK

 Portuguese

(PHOTO MODEL LB-115-4 Click on photo to enlarge)

The "GoPower LOAD BANK"  is a portable equipment, for load testing in electric or Diesel GPUs. It is powered by the GPU itself, and simulates the load of aircraft that the customer owns. This model was specially developed to simulate the load of the aircraft Embraer 190/195, Airbus A320 / 330, Boeing 737/747, Electric air conditioning units (ACU), etc. It is mounted in a lightweight, easy-to-carry case for external service in a Case (also supplied). Its practicality is to be able to be used in places without electric power next to GPU in test.

They are manufactured in 3 models, with load currents of 100, 150 and 225A per phase, in 115VAC. Others on request.

They use thermal turbines of good power and without restriction of time of use. The same model meets GPU's of 115VAC and 28VDC.

For higher power GPUs use two devices, one on each output cable.

It has digital instrumentation that informs the voltage, frequency and current in the input connector. These instruments are not used when connected to 28VDC.

When switched on, the LEDs indicate the sequence of phases, if correct, and if "E" and "F" are connected. It supplies 28VDC Interlock voltage on the "F" pin and receives the return on the "E" pin, signaled by a Blue LED. It does not use internal batteries and does not need to be connected to the mains.

Its commands are easy to operate and can be used by a technician without previous knowledge, just select the load you need to test a GPU.

Cabinet in steel, painted with epoxy electrostatic painting in the color "Gray Textured" and with side covers in stainless steel.

"GOPOWER LOAD BANK" is manufactured under strict technical standards and modern industrial technology, using high quality components and raw materials that guarantee its efficiency, safety and durability.

By operating at any frequency it can also be used in generator sets of 127 / 220V, 50 / 60Hz.

GOPOWER LOAD BANK MODEL LB115-4 TECHNICAL INFORMATION ".

INPUT: 115 / 200V three-phase or 28VDC. Frequency range of the input voltage from 0 to 600Hz.

LOAD CURRENT at 115 / 200VAC, 400Hz: 25 to 100A per phase, with panel adjustment (4 positions).

LOAD CURRENT at 127 / 220VAC, 50 / 60Hz: 28 to 112A per phase, with panel adjustment.

28VDC LOAD CURRENT: 7 to 28A, as adjusted on the panel.

Power Factor: = 1.

Dimensions: Height 50 cm x Depth 49 cm x Width 21 cm.

Weight: 24Kg. Complete weight within CASE: 38Kg.

Current delivery time from 30 to 45 days. Check your price with our sellers.

GOPOWER LOAD BANK MODEL LB115-6 TECHNICAL INFORMATION ".

INPUT: 115 / 200V three-phase or 28VDC. Frequency range of the input voltage from 0 to 600Hz.

LOAD CURRENT at 115 / 200VAC, 400Hz: 25 to 150A per phase, with panel adjustment (6 positions).

LOAD CURRENT at 127 / 220VAC, 50 / 60Hz: 28 to 168A per phase, with panel adjustment.

CHARGING CURRENT IN 28VDC: 7 to 42A, as adjusted on the panel.

Power Factor: = 1.

Dimensions: Height 50 cm x Depth 65 cm x Width 21 cm.

Weight: 30Kg. Complete weight inside the "CASE": 46Kg.

Current delivery time from 45 to 60 days. Check your price with our sellers.

GOPOWER LOAD BANK MODEL LB115-9 TECHNICAL INFORMATION ".

INPUT: 115 / 200V three-phase or 28VDC. Frequency range of the input voltage from 0 to 600Hz.

LOAD CURRENT at 115 / 200VAC, 400Hz: 37.5 to 225A per phase, with panel adjustment (6 positions).

LOAD CURRENT at 127 / 220VAC, 50 / 60Hz: 28 to 168A per phase, with panel adjustment.

CHARGING CURRENT IN 28VDC: 10.5 to 63A, as adjusted on the panel.

Power Factor: = 1.

Dimensions: Height 74 cm x Depth 65 cm x Width 21 cm.

Weight: 46Kg. Complete weight inside the "CASE": 61Kg.

Current delivery time from 45 to 60 days. Check your price with our sellers.